We need used injection molding machines. Do you have?
We need spare parts from the TETRA PAK company, tell me if you can supply them? Hope you are fine and doing well. 5932040-0144 O - Ring food safe 40x3.5 – 60 шт. 5971772-0642 - Bush for knife – 200 шт. 5971092-0355 - Scraping knife (2 mm) L=992 – 4 шт.
Re: #1 Shredder Shredder for processing film in bales. Bale size - 1.2*1*1m / 500kg. Bales can be fastened the with thin wire. It should be designed to work with LDPE film with a thickness of 30 to 300 microns, including those with a high degree of contamination. As part of the delivery, it is necessary to provide: Control panel (PLC), Line-conveyor to the shredder for film bales, but not the bale is processed completely. The staff breaks the bale into layers manually and feeds it separately on the conveyor. Optionally provide: A weight batcher in the buffer, which will accumulate flex and give out further to the line when the values set on the controller are reached. Primary requirements: Productivity - not less than 2000 kg per hour, The film fraction at the exit should be approximately 40 * 40 mm (50 * 50 mm is allowed), Easy access to knives for quick replacement. It is also necessary to reflect the composition and cost of the spare parts kit in the commercial offer and indicate the approximate period, how often it needs to be changed. It is also necessary to get an answer - can this shredder process polypropylene big bags. Re: #2 Squeeze Press Pressing is necessary for drying and singeing the flex. The film fraction at the entrance will be about 40 * 40 mm, 30-40 microns thick. The humidity of the film at the entrance will be about 15-20% humidity, at the exit there should be no more than 5% humidity. Productivity - not less than 1000 kg per hour, The kit must include a control panel (PLC) It is also necessary to reflect the composition and cost of the spare parts kit in the commercial offer and indicate the approximate period, how often it needs to be changed. Additionally, needed the function of the squeezer (singing off the flex after pressing). Re: #3 Granulator (extruder) Used to convert flexes into granules. We are interested in a line with a cutting on the head. Optional: 1) To provide a version with a two-stage extruder, 2) With a built-in thermal compactor. Productivity: 500 kg per hour on PVD. But it should be able to work with LDPE, HDPE and polypropylene. The melt flow index (MFI) is from 0.3 to 1. It is necessary to provide a version with two degassing zones. The kit must include a control panel (PLC) Auger: bimetal, Diameter to length ratio: 30:1. Filter: Either "infinite" (2-channel, 2-position), Or laser cleaning filter. In the commercial offer, it is also necessary to reflect the composition and cost of the spare parts kit and indicate the approximate period, how often it needs to be changed. Looking forward for your soonest reply.
Please consider the possibility of supplying our address with an extruder for the production of shrink film according to the following tech. task: Number of layers, pcs 1-3 Degree of shrinkage for the film, % Longitudinal - 60-80% Transverse - 20-30% Productivity 300 Kg/h Layer ratio, % 40/30/30 Materials: 1) Layer A - LDPE, HDPE, PL 2) Layer B - LDPE, HDPE, PL 3) Layer C - LDPE, HDPE, PL Film thickness, microns 20-200 microns Thickness tolerance, % 5 Head diameter, mm 300-400mm Sleeve width in a flat-folded form, mm 1500mm Spinneret gap, mm 1mm Gravimetric dosing system. Number of components - 3 Winder 2 position, automatic IBC system (internal cooling of a sleeve)
Interested in thermoforming equipment for molding products from polypropylene sheet thermoforming equipment
I am interested in equipment for the production of rubber goods
we interested company who have injection molding machine, because we also need make plastic produscts wiht same qty.
Catalog of vertical injection molding machines
PVC mixer is required, we are looking for a supplier in Moscow Yes, this equipment is required for the production of wood-polymer composite, we produce decking! Requires a PVC mixer with a hot tank from 800/1000 liters and above
I am interested in the production line for making styrofoam balls
