45° ELBOW, 3D, BW, PN10, SDR17, AS4130/4131, HDPE, PE100 DN 90 Q 1 ELBOW 45°, 3D, M.B., PN6.3, SDR26, AS4130/4131, HDPE, PE100 DN 63 Q 8 ELBOW 45°, 3D, M.B., PN6.3, SDR26, AS4130/4131, HDPE, PE100 DN 110 Q 5 45° ELBOW, SWEEP, M.B., PN10, SDR17, AS4130/4131, HDPE, PE100 DN 110 Q 1 ELBOW 60°, 3D, M.B., PN6.3, SDR26, AS4130/4131, HDPE, PE100 DN 90 Q 1 ELBOW 90°, 3D, M.B., PN10, SDR17, AS4130/4131, HDPE, PE100 DN 90 Q 6 ELBOW 90°, 3D, M.B., PN6.3, SDR26, AS4130/4131, HDPE, PE100 DN 63 Q 45 ELBOW 90°, 3D, M.B., PN6.3, SDR26, AS4130/4131, HDPE, PE100 DN 90 Q 22 ELBOW 90°, 3D, BW, PN6.3, SDR26, AS4130/4131, HDPE, PE100 DN 110 Q 40 ELBOW 90°, 3D, BW, PN6.3, SDR26, AS4130/4131, HDPE, PE100 Cutting angle 20.5° DN 90 Q 1 ELBOW 90°, 3D, BW, PN6.3, SDR26, AS4130/4131, HDPE, PE100 Cutting angle 45° DN 110 Q 1 90° ELBOW, 3D, BW, PN8, SDR21, AS4130/4131, HDPE, PE100 DN 90 Q 20 ELBOW 90°, 3D, BW, PN8, SDR21, AS4130/4131, HDPE, PE100 Cutting angle 45° DN 63 Qty 1 90° ELBOW, SWEEP, BW, PN10, SDR17, AS4130/4131, HDPE, PE100 DN 110 Q 8 45° ELBOW, LONG END, M.ARR., PN6.3, SDR26, AS4130/4131, HDPE, PE100 DN 110 Q 4 45° ELBOW, LONG SPIGOT, M.ARR., PN8, SDR21, AS4130/4131, HDPE, PE100 DN 63 Q 4 90° ELBOW, LONG SPIGOT, M.B., PN10, SDR17, AS4130/4131, HDPE, PE100 DN 32 Q 1 90° ELBOW, LONG SPIGOT, M.ARR., PN6.3, SDR26, AS4130/4131, HDPE, PE100 DN 32 Q 4 90° ELBOW, LONG SPIGOT, BW, PN6.3, SDR26, AS4130/4131, HDPE, PE100 DN 63 Q 30 90° ELBOW, LONG SPIGOT, M.ARR., PN8, SDR21, AS4130/4131, HDPE, PE100 DN 32 Q 8 90° ELBOW, LONG SPIGOT, BW, PN8, SDR21, AS4130/4131, HDPE, PE100 DN 63 Q10 90° ELBOW, LONG SPIGOT, BW, PN8, SDR21, AS4130/4131, HDPE, PE100 DN 90 Q 15 90° ELBOW, LONG SPIGOT, BW, PN8, SDR21, AS4130/4131, HDPE, PE100 DN 110 Q 8 90° ELBOW, SW, PVC, SCH 80, ASTM D-2467 DN 50 Q 5 SIDE 45°, M.ARR., PN6.3, SDR26, AS4130/4131, HDPE, PE100 DN 90 Q 1 LATERAL, 45°, M.ARR., PN8, SDR21, AS4130/4131, HDPE, PE100 DN 90 Q 1 CONC. RED SHORT, M.ARR., PN10, SDR17, AS4130/4131, HDPE, PE100 DN 225 NOMINAL END DIAMETER 90 Q RED.CONC. SHORT, M.ARR., PN8, SDR21, AS4130/4131, HDPE, PE100 DN 90 NPMINAL END DIAMETER 63 Q3 END CAP, SHORT, PN16, SDR11, AS4130/4131, HDPE, PE100 DN 20 Q4 Tapping saddle. HDPE molded in PE100, according to AS 4131 and AS 4130, with DN25 BSP male OD250x32 Q13 Connection saddle. HDPE molded on PE100, AS 4131 and AS 4130, including DN50 BSP male OD280x50 Q 9
