Re: #1 Shredder
Shredder for processing film in bales. Bale size - 1.2*1*1m / 500kg. Bales can be fastened the with thin wire.
It should be designed to work with LDPE film with a thickness of 30 to 300 microns, including those with a high degree of contamination.
As part of the delivery, it is necessary to provide:
Control panel (PLC),
Line-conveyor to the shredder for film bales, but not the bale is processed completely. The staff breaks the bale into layers manually and feeds it separately on the conveyor.
Optionally provide: A weight batcher in the buffer, which will accumulate flex and give out further to the line when the values set on the controller are reached.
Primary requirements:
Productivity - not less than 2000 kg per hour,
The film fraction at the exit should be approximately 40 * 40 mm (50 * 50 mm is allowed),
Easy access to knives for quick replacement.
It is also necessary to reflect the composition and cost of the spare parts kit in the commercial offer and indicate the approximate period, how often it needs to be changed.
It is also necessary to get an answer - can this shredder process polypropylene big bags.
Re: #2 Squeeze Press
Pressing is necessary for drying and singeing the flex.
The film fraction at the entrance will be about 40 * 40 mm, 30-40 microns thick.
The humidity of the film at the entrance will be about 15-20% humidity, at the exit there should be no more than 5% humidity.
Productivity - not less than 1000 kg per hour,
The kit must include a control panel (PLC)
It is also necessary to reflect the composition and cost of the spare parts kit in the commercial offer and indicate the approximate period, how often it needs to be changed.
Additionally, needed the function of the squeezer (singing off the flex after pressing).
Re: #3 Granulator (extruder)
Used to convert flexes into granules. We are interested in a line with a cutting on the head.
Optional:
1) To provide a version with a two-stage extruder,
2) With a built-in thermal compactor.
Productivity: 500 kg per hour on PVD. But it should be able to work with LDPE, HDPE and polypropylene.
The melt flow index (MFI) is from 0.3 to 1.
It is necessary to provide a version with two degassing zones.
The kit must include a control panel (PLC)
Auger: bimetal, Diameter to length ratio: 30:1.
Filter: Either "infinite" (2-channel, 2-position), Or laser cleaning filter.
In the commercial offer, it is also necessary to reflect the composition and cost of the spare parts kit and indicate the approximate period, how often it needs to be changed.
Looking forward for your soonest reply.