The research and development lasted for years, the test are exceeded 100 times and 20 Patents were applied for. We shared 80% market in domestic and also shipped to exceed100 countries ( eg.: Spain, Japan, Korea, India, Russia etc.) Our 6th Generation of the Debinding Furnace has a higher debinding efficiency,more suitable to thicker products (60 – 80 mm thick) and a wider range of materials (Ceramic,titanium,copper,iron,stainless steel etc.) Our eclectically heating Burn Off Device is another advantage and a contribution for the totally clean environmental protection. Meanwhile have to mention our sintering furnace We not only produce the regular sintering furnace but also the continuous sintering furnace, greatly help our customer improved their capacity The sintering suitable for different metals (eg.: stainless, copper and titanio etc.) need find some turkey customer who do the 3D or metal injection mold we are the debinding furnace & sintering furnace factory
TL-5 burning furnace is consists of 5 parts: a blower, flue gas induced draft fan, burner, five-layer sleeve body and control system. The flue gas in the furnace takes two rounds while the fresh air takes three rounds. Natural gas is burned through the burner to generate a high-temperature flame. Under the action of the flue gas fan, the heat is transferred to the heated air through the five-layer sleeve wall and dense fins, meanwhile the flue gas is discharging out the body after it´s temperature down to 150℃. The heated fresh air enter the sleeves through blower. After heat mix, the temperature rises to the setting number and sent out from the hot air outlet. 4、Advantages/features 1. Continuously provide pure air with constant temperature and constant pressure. 2. Temperature has a wide adjustable range: 40~300℃ 3. Indirect heating, automatic operation, exhaust gas emissions meet the requirements 4. Reasonable design, compact structure, thermal efficiency up to 75% 5. Stainless steel high temperature resistant inner tank, durable
TL-1 burning furnace is consists of 5 parts: natural gas burner + inner tank + insulation box + fan + control system. The burner forms a high-temperature flame after full combustion in the high-temperature resistant inner tank, these flame mixes with the cold or recirculated air to produce a new and high-temperature air. Under the action of the fan, it is discharged to provide heating for drying machines or places. 1. Simple structure and low cost 2. Large air volume and small wind temperature fluctuation 3. Stainless steel high temperature resistant inner tank, durable 4. Automatic gas burner, complete combustion, high efficiency. (After settng up, the system can control the ignition+cease fire+temperature adjust automatic), 5. High-density fire-resistant rock wool insulation box to avoiding heat loss 6. High temperature and high humidity resistant fan with IP54 protection rating and H-class insulation rating.
