Two Workstations CNC Pipe Hole Punching Machine Two Workstations CNC Pipe Hole Punching Machine is automatic machinery for punching several holes on pipe, it can punch different shapes hole, different size, shapes and material of pipe. It has 2 workstations with 2 sets of hydraulic cylinders for different punching molds. Workers load pipe in punching molds, the pipe will be automatically fed according to setting distance, and automatically punch holes on pipes. All parameters like pipe length, hole quantity, hole distance will be set in the PLC control system, the touch screen is available in multi-language.
we designing and manufacturing medium frequency heating hydraulic welded pipe bending machine, thick wall elbow forming machine pipe expanding machine, press, multi functional beveling machine, tee cold forming machine, etc.
The Main Technical Parameters of The Pipe Expanding Machin 1. The oil cylinder: Ф 180mm,the rod：Ф 140mm ，the effective trip: 6m, pressure：21Mpa,2 bars The maximum thrust of the 2 cylinders: 110 tons; The working speed: 0—150cm/min , The max returning speed: 500cm/min. 2. The pump station： 63scy-plunger pump :1 set, 18.5KW Moor: 1 set (the master working pump) CB-50 gear pump 1 set，7.5KW Motor: 1 set （fast moving forward and backward CB-16 gear pump 1 set，5.5KW Motor: 1 set （for lifting the pushing gate） 3. The hydraulic valve is integrated oil rout, hydraulic black pushing gate. 4. The frame for the main engine: 20# channel steel, welded with 18kg steel rail 5. The panel for the main engine: welded with 18mm medium plate 6. distribution cabinets, operation box 1 set 7. Intermediate-frequency power (power 400KW 380v、220v、50Hz) (SCR) 8 This machine expands the pipe by shorten the mother pipe: eg: 219mm*10mm*8m→325mm*9mm*5.8m The works and the scope of supply of the supplier 1. Design and manufacture hydraulic pushing pipe expanding machine 2. Guide to install the equipment as the equipment arrives at the factory of buyer 3. Debugging and test run the equipment 4. Main machine part, hydraulic pump station, heating system. 5. A. frame for the main engine: 1 piece, hydraulic pump station: 1 set distribution ark 1set, front and back fork door: 3 blocks . the feeding and loading shelves, the feeding lifter. B. Intermediate-frequency electric ark：1 piece,
aying head driving gear box adopts to welding structure. The gear and bearings in the box are thin oil central lubrication process. Spinning head is installed in the safety guard. Center line down to 10 after the water cooling device of finishing mill group and pinch roll. Laying head does the circular motion to changes the rolled metal from the pinch roll pushed to the 1,080 mm diameter spiral coil, and the tile the spiral coil to scattered volume cooling roller bed(downstream equipment), then
As a professional Mini Re-bar Steel Rolling Mill manufacturer in China, we can supply designing, manufacturing, installation and commissioning of the equipment with“turn-key”service. We can also design, manufacture and revamp other non-standard requirement according to the requirements of users.
