Currently, we need to have a replacement to the existing kettle, as it has been installed for 7 years. The size of the kettle is 7.00m x 1.2m x 3.2m, and wall thickness is 60mm. It should be ultrasonically tested, automatically electroslag welded, and fabricated from special steel: max 0.08% C, 0.5% Mn, max 0.02% P, max 0.02% S, traces of Si. And made of U-forms center sections with pre-welded pressed ends to the internal dimensions mentioned above.
We are a company based in China, specializing in the production of tungsten/carbon steel diamond wire electroplating equipment. This equipment is designed to manufacture cutting consumables for the following applications: Photovoltaic industry: Truncating, squaring, and slicing of monocrystalline and polycrystalline silicon; Semiconductor industry: Cutting and slicing of semiconductor materials; LED industry: Cutting of non-metallic hard and brittle materials such as sapphire, specialty glass, and ceramics.
Currently, we need to have a replacement to the existing kettle, as it has been installed for 7 years. The size of the kettle is 7.00m x 1.2m x 3.2m, and wall thickness is 60mm. It should be ultrasonically tested, automatically electroslag welded, and fabricated from special steel: max 0.08% C, 0.5% Mn, max 0.02% P, max 0.02% S, traces of Si. And made of U-forms center sections with pre-welded pressed ends to the internal dimensions mentioned above.
Can you tell us the price of this order and provide us with full information about it (manufacturing and delivery period and warranty) according to the following forms?
I am looking for kettle for hot dip galvanising with following specifications: made of U-formed center-section with pre-welded pressed ends to the internal dimensions detailed below: 9.00 mm length 1.50 mm width 2.50 mm depth 50 mm wall thickness welded at the top a flange 150 x 50 mm and two (2) sub-flange 25 x 12 mm (6 mm below the top) respectively 100 x 12 mm (200 mm below the top), including 24 studs for HASCO corner protection shields and 4 lifting lugs. kettle should be ultrasonic tested, automatically electroslag welded, fabricated from special plate with the following typical analysis: C 0.08% max, Mn 0.5% max, P 0.02% max, S 0.02% max & Si traces
This is A***,from a metal wire drawing machine company,hope to cooperate with your company,the product we can provide in the product brochure,hope it be helpful to you,thank you. - straight wire drawing machine - water tank wire drawing machine - pulley wire drawing machine - horizontal wire drawing machine - trunk take-up machine - layer winding machine - spooler take-up machine - Pay-off machine - straightening and cutting machine - electric galvanize coating - annealing furnace - pre-treatment including abrasive belt derusting - steel brush derusting - online phosphating
