We kindly request your offer as per the attached specifications. While preparing your offer kindly consider our preferred conditions: Offer Validity: 60 days from the date of closing. Datasheet & MTC: These are very important and must be included. Delivery Period: Specify production and shipping time (Shortest delivery time).
We are actively seeking reliable suppliers for high-quality products to enhance our product offering. We are currently responding to a tender and are sourcing the required valves as per their detailed technical RFQ. We kindly request your **best technical and commercial offer**, including: Unit pricing for each item (FOB / EXW). STRAINER (Y-TYPE) S.N 29 - 1 Each Size: 2" Class: 900 LBS (TD-91) Ends: Butt Weld ANSI B 16.25, Pipe Schedule 80, L=320mm Description: Cast C/Steel Y-Filter Flanged Cover Type Construction: BODY: ASTM A216 WCB, BOLTED RETAINER PLATE: ASTM A 105 NPT RETAINER BUSHING, BOLTING: SA193 B7 & 194 2H, GASKET: SPIRAL WOUND 316L, WIRE MESH BACK UP S.S SCREEN 8/10 SCREEN SECTION 1.5 mm. TEST: API 598 Where applicable. MARKING: Identification Plate ACC. To MSS SP 25. Service: Steam Temp. 420C, Press. 54 Bar
We are actively seeking reliable suppliers for high-quality products to enhance our product offering. We are currently responding to a tender and are sourcing the required valves as per their detailed technical RFQ. We kindly request your **best technical and commercial offer**, including: Unit pricing for each item (FOB / EXW). PLUG VALVE S.N 22 - 2 Each Size: 1 1/2" Class: 300 LBS (FC-33) S.W. ANSI B 16.11 Ends: Flanges R.F ANSI B 16.5 "stock finish" FLANGE ND: 3", L=214mm Description: cast c/steel valve with heating jacket, bolted bonnet, wrench operated, non lubricated over size flange. Construction: BODY (ASTM A 216 WCB), PLUG (CAST DUCTILE IRON), SLEEVE (PTFE). TEST: API 598 & 599 Where applicable. MARKING: Identification Plate ACC. To MSS SP 25. Service: Liquid Sulphur, (TEMP. 145 C, PRESS. 15 BAR) Note1: copper or its alloys prohibited Note2: 2 sets of sealing joints & 1 set of seat for each valve. S.N 23 - 2 Each Size: 1/2" Class: 150 LBS (FC-16+18) Ends: Flanges R.F ANSI B 16.5 "stock finish", L=108mm Description: Cast St/Steel Valve, Wrench Operated, Non lubricated, Bolted Bonnet. Construction: BODY (A 296 CN 7M), PLUG (ALLOY 20 OF UB6), SLEEVE (PTFE). TEST: API 598 & 599. Service: Concentrated Acid & Amonia phosphoric slurry (TEMP. 90 C, PRESS. 10 BAR). Note1: copper or its alloys prohibited Note2: 2 sets of sealing joints & 1 set of seat for each valve. S.N 24 - 6 Each Size: 1 1/2" Class: 150 LBS Ends: Flanges R.F ANSI B 16.5 "stock finish" Description: Cast St/Steel Valve, Wrench Operated, Non lubricated, Bolted Bonnet. Construction: BODY (A 296 CN 7M), PLUG (ALLOY 20 OF UB6), SLEEVE (PTFE). TEST: API 598 & 599. Service: Concentrated Acid & Amonia phosphoric slurry (TEMP. 90 C, PRESS. 10 BAR). Note1: copper or its alloys prohibited Note2: 2 sets of sealing joints & 1 set of seat for each valve. S.N 25 - 6 Each Size: 6" Class: 150 LBS (FC-13) Ends: Flanges R.F ANSI B 16.5 "stock finish", L=267mm Description: Cast St/Steel Valve, Wrench Operated, Non lubricated, Bolted Bonnet. Construction: BODY (A 296 CN 7M), PLUG (ALLOY 20 OF UB6), SLEEVE (PTFE). TEST: API 598 & 599. Service: Concentrated Acid & Amonia phosphoric slurry (TEMP. 90 C, PRESS. 10 BAR). Note1: copper or its alloys prohibited Note2: 2 sets of sealing joints & 1 set of seat for each valve. S.N 26 - 4 Each Size: 6" Class: 150 LBS (FC-16+18) Ends: Flanges R.F ANSI B 16.5 "stock finish", L=267mm Description: Cast St/Steel Valve, Gear Operated, Non lubricated, Bolted Bonnet. Construction: BODY (ASTM A 351 CF 8M), PLUG (AISI 316), SLEEVE & SEAT (PTFE), COVER (AISI 316). TEST: API 598 & 599. Service: Cold Concentrated Sulphuric Acid (TEMP.45 C PRESS.: 9 Bar) Note: copper or its alloys prohibited S.N 27 - 1 Each Size: 2" Class: 150 LBS (FC-13) Ends: Flanges R.F ANSI B 16.5 "stock finish", L=178mm Description: Cast St/Steel Valve, Wrench Operated, Non lubricated, Bolted Bonnet. Construction: BODY (ASTM A 351 CF 8M), PLUG (AISI 316), SLEEVE & SEAT (PTFE), COVER (AISI 316). TEST: API 598 & 599. Service: Cold Concentrated Sulphuric Acid (TEMP.45 C PRESS.: 9 Bar) Note: copper or its alloys prohibited S.N 28 - 1 Each Size: 3" Class: 150 LBS (FC-17) Ends: Flange R.F ANSI B 16.5, L=203mm Description: Cast Iron Plug Valve PTFE Lined, Wrench Operated, Non Lubricated, Bolted Bonnet. Construction: BODY (CAST IRON) - LINNED PTFE, PLUG (CAST IRON) - LINNED PTFE. Service: Diluted Sulphuric Acid & Laboratories Effluent Water Note: 2 sets of sealing joints & 1 set of seat for each valve. S.N 31 - 2 Each
We are actively seeking reliable suppliers for high-quality products to enhance our product offering. We are currently responding to a tender and are sourcing the required valves as per their detailed technical RFQ. We kindly request your **best technical and commercial offer**, including: Unit pricing for each item (FOB / EXW). GLOBE VALVE S.N 18 - 1 Each Size: 2" Class: 300LBS (EC-14) Ends: Flanges ANSI B 16.5 "stock finish" Description: cast c/steel valve, bolted bonnet, outside screw rising stem & yoke Operation Method: Hand wheel operated. Construction: ANSI B 16.10, BODY & BONNET (ASTM A 216 WCB), TRIM (A 182 F6), SEAT (A 182 F6 + STELLITE GR.6), STEM (A 182 F6). Test: API 600 Where applicable MARKING: Identification Plate ACC. To MSS SP 25. Service: Water, Temp (175C), PRESS. 6 BAR). Note: 2 sets of sealing joints & 1 set of seat for each valve. S.N 19 - 3 Each Size: 2" Class: 150 LBS (BC-11) Ends: Flanges R.F ANSI B 16.5 "stock finish" Description: cast c/steel valve, bolted bonnet, outside screw rising stem & yoke Operation Method: Hand wheel operated. Construction: ANSI B 16.10, BODY & BONNET (ASTM A 216 WCB), TRIM (A 182 F6), SEAT (A 182 F6), STEM (A 182 F6). Test: API 600 MARKING: Identification Plate ACC. To MSS SP 25. Service: Water, (Temp. 50C, PRESS. 16 BAR.) S.N 20 - 1 Each Size: 1" Class: 1500 LBS(BB-W1) S.W. ANSI B 16.11 Ends: Flanges ANSI B 16.5 "stock finish" Description: forged c/steel valve, welded bonnet, outside screw rising stem & yoke, bolted stuffing box, renewable seat. Operation Method: Hand wheel operated. Construction: ANSI B 16.10, BODY & BONNET (ASTM A 105), TRIM (A 182 F6), SEAT (A 182 F6 + STELLITE ON BODY & SEAT). TEST: API 598 & API 602 Where applicable. MARKING: Identification Plate ACC. To MSS SP 25. Service: Water, Temp (175C), PRESS. 6 BAR). Note1: copper or its alloys prohibited Note2: 2 sets of sealing joints & 1 set of seat for each valve. S.N 21 - 2 Each Size: 2" Class: 900 LBS (BD-91) Ends: Butt Welding ANSI B 16.25 to suit connection pipes - SCH.80 Description: cast c/steel valve, bolted bonnet, outside screw rising stem & yoke, bolted stuffing box, renewable seat. Operation Method: Hand Wheel operated. Cons: ANSI B 16.10, BODY & BONNET (ASTM A 216 WCB), TRIM (A 182 F6), SEAT & DISC (A 182 F6 + STELLITE GR 6), STEM (A 182 F6) Test: API 598 & API 600 Where Applicable. MARKING: Identification Plate ACC. To MSS SP 25. Service: H.P. STEAM, (TEMP. 420 C), (PRESS. 54 BAR). WATER, (Temp. 304 C, PRESS. 90 BAR).
We are actively seeking reliable suppliers for high-quality products to enhance our product offering. We are currently responding to a tender and are sourcing the required valves as per their detailed technical RFQ. We kindly request your **best technical and commercial offer**, including: Unit pricing for each item (FOB / EXW). CHECK VALVE S.N 14 - 1 Each Size: 2" Class: 300LBS (CC-33) Ends: Flanged R.F. ANSI B 16.5 " MSOTH FINISH R.T 10 Description: CAST KILLED C/STEEL Valve, Bolted cover, renewable seat. Construction: ANSI B 16.10, Body & Cover (ASTM A 352 LCB) Disc, Seat Hinge PIN (A 182 F6). Test: API 600 Where Applicable MARKING: Identification Plate ACC. To MSS SP 25. Service: Liquid Ammonia, (TEMP. 50 C), (PRESS. 21 BAR). Note: copper or its Alloys Prohibited. Note2: 2 Sets of gasket & seat for each valve. S.N 30 - 1 Each Size: 10" Class: 900LBS (CD-91) Ends: Butt Welding ANSI B 16.25 Description: cast c/steel valve, bolted cover, renewable seat. Construction: ANSI B 16.10, BODY & COVER (ASTM A 216 WCB). DISC & SEAT (A 182 F6 + STELLITE), HINGE PIN (A 182 F6). GASKET RING JOINT. Test: API 600 Where Applicable. MARKING: Identification Plate ACC. To MSS SP 25. Service: H.P. STEAM, (TEMP. 420 C), (PRESS. 54 BAR). Note: 2 sets of sealing joints & 1 set of seat for each valve. S.N 33 - 2 Each Size: 4" Class: 150 LBS Ends: FLANGED ANSI Description: Ball Check Valve (7434601), Type: 071 (Ball - PTFE), GGG 40.3 / PVDF TEST: API 598-599.
We are actively seeking reliable suppliers for high-quality products to enhance our product offering. We are currently responding to a tender and are sourcing the required valves as per their detailed technical RFQ. We kindly request your **best technical and commercial offer**, including: Unit pricing for each item (FOB / EXW). BALL VALVE S.N 13 - 2 Each Size: 3/4" Class: 150 Lbs (DA-12) Ends: NPT, Female ANI B 2.1 Description: Forged St/Steel Valve, reduced bore, fire safe type, massive ball. Packing Type: Bolted stuffing box. Seat Type: Renewable seat. Operation Method: Wrench operated 1/4 inch turn. Cons: API 6 D, Body (ASTM A 182F 316L), Body stem 316, Seats (PTFE) Seat (A182 F6 + STELLITE GR.6), Seat (A 182 F6). Test: API 598 Service: Semi treated water, temp:110C, 10 Bar MARKING: Identification Plate ACC. To MSS SP 25. copper or its Alloys Prohibited. Third Party
We are actively seeking reliable suppliers for high-quality products to enhance our product offering. We are currently responding to a tender and are sourcing the required valves as per their detailed technical RFQ. We kindly request your **best technical and commercial offer**, including: Unit pricing for each item (FOB / EXW). DIAPHRAGM VALVE S.N 3 - 2 Each Size: 3" Calss: 150 LBS BODY: Hard Rubber lined Cast Iron F.T. 22. Operation Method: Hand Wheel: STANDARD. Bonnet: Sealed Type, Cast Iron. Diaphragm: HYPALON. Flange: Template and bore holes off center-LINES, to norms ANSI B 16.5 series full Face Hard rubber Lined. Face to Face length to DIN standard 3202 F1. With opening closing indicator. N.B.: copper or its Alloys Prohibited. Third Party Laboratory test Certificate must. Confirm: Diaphragm material for H2SO4 diluted costic sosa diluted, Amin. COSTIC SODA DILUTED, NALCO, AMIN. S.N 4 - 82 Each Size: 2" Calss: 150 LBS Straight way type. Operation Method: Hand Wheel dive & opening closing indicate. Body &Bonnet: Cast Iron GG 25 ACC. TO DIN 1691 Flange: ANSI B 16.5 150 #FF Body & Flange full Face: Lined W/ Bonnet Diaphragm: Soft BUTYL rubber Face to Face length W/out Lining as per DIN standard 3202 F1. Operating Temperature: 40-90 c Note: copper or its Alloys Prohibited. Third Party Laboratory test Certificate is required S.N 34 - 11 Each Size: 2" Class: 150 LBS Description: Ductile Iron A (Drilled to ASA 150 Lbs), Body: Cast Iron PP-Lined, Hand Wheel Operated, Face to Face Length to DIN 3202 FI, Diaphragm: 237 Hypalon S.N 35 - 4 Each Size: 6" Class: 150 LBS Description: Ductile Iron A (Drilled to ASA 150 Lbs), Body: Cast Iron PP-Lined, Hand Wheel Operated, Face to Face Length to DIN 3202 FI, Diaphragm: 237 Hypalon
We are actively seeking reliable suppliers for high-quality products to enhance our product offering. We are currently responding to a tender and are sourcing the required valves as per their detailed technical RFQ. We kindly request your **best technical and commercial offer**, including: Unit pricing for each item (FOB / EXW). GATE VALVE S.N 2 - 3 Each Size: 2" Class: 900 Lbs (AD-91) Ends: Butt Welding ANSI B 16.25 to suit connection pipes - SCH.80 Description: CAST C/STEEL Bonnet Type: Bolted Bonnet Stem Type: Outside screw rising STEM & YOKE, flexible wedge or parallal slide. Packing Type: Bolted stuffing box. Seat Type: Renewable seat. Operation Method: Hand Wheel operated. Cons: ANSI B16.10, Body & Bonnet (ASTM A216 WCB), DISC (A182 F6 + Stellite GR.6). Seat (A182 F6 + STELLITE GR.6), STEM (A 182 F6). Test: API 598 & API 600 Where Applicable. MARKING: Identification Plate ACC. To MSS SP 25. Service: H.P. STEAM, (TEMP. 420 C), (PRESS. 54 BAR). Note: copper or its Alloys Prohibited. S.N 5 - 20 Each Size: 2" Class: 150 Lbs (AC-11) Ends: Flanged ANSI B 16.5 " Stock finish" Description: CAST C/STEEL Valve Bonnet Type: Bolted Bonnet Stem Type: Outside screw rising STEM & YOKE, Solid wedge. Packing Type: Bolted stuffing box. Seat Type: Renewable seat. Operation Method: Hand Wheel operated. Cons: ANSI B16.10, Body & Bonnet (ASTM A216 WCB), Trim (A182 F6 + Stellite GR.6). Seat (A182 F6 + STELLITE GR.6), Seat (A 182 F6). Test: API 598 & API 600 Where Applicable. MARKING: Identification Plate ACC. To MSS SP 25.
We are actively seeking reliable suppliers for high-quality products to enhance our product offering. We are currently responding to a tender and are sourcing the required valves as per their detailed technical RFQ. We kindly request your **best technical and commercial offer**, including: Unit pricing for each item (FOB / EXW). BUTTERFLY VALVE S.N 1 - 1 Each Size: 20" Flanged Type. Class: 150 Lbs Operation Method: Gear Operated. CONSTRUCTION: Body: Cast Ductile Iron Shaft: S.STEEL A276 type: 420 Disc: Stainless Steel 316 Lining: E.P.D.M Service: Sea Water. S.N 15 - 1 Each Size: 10" Class: 150LBS (EE-11) Ends: Between Flanges ANSI B 16.5 R.F "STOCK FINISH" Description: CAST C/STEEL, Lining Elastomer, Wafer Type. Operation Method: Gear operated. Cons: Body (ASTM A 216 WCB), DISC (Ductile Iron G.S 38. 15), Inner Lining (EPDM), Shaft (A276 Type420) Test: ACC to MSS SP 61 Where Applicable. MARKING: Identification Plate ACC. To MSS SP 25. Service: Fire Fighting water, Temp(50 C), PRESS. 16 BAR). Note: 2 Sets of sealing ring & inner linning for each valve. S.N 16 - 6 Each Size: 16" Class: 150LBS (EE-15) Ends: Between Flanges ANSI B 16.5 R.F "STOCK FINISH" Face to face= 102mm Description: S/STEEL Valve with operator, Lining Elastomer, Wafer Type. Operation Method: Gear operated. Construction: Body (Z3 NC DN 25.20 ALLOY 20 OR UB6), DISC (Z3 NC DN 25.20 ALLOY 20 OR UB6), Seat (Teflon), Shaft (Z3 NC DN 25.20 ALLOY 20 OR UB6) Test: MSS SP 61 For Body MARKING: Identification Plate ACC. To MSS SP 25. Service: Concentrated Sulphuric Acid,Temp (120C), PRESS. 10 BAR). Note: 2 Sets of sealing ring & inner linning for each valve. S.N 17 - 5 Each Size: 24" Class: 150LBS (EC-14) Ends: Flanges ANSI B 16.5 Flate face Coated Description: Rubber Linned Cast Iron Valve. Operation Method: Gear operated. Construction: BODY (CAST IRON A 4864 GRADE 25B), SHAFT (A 276 TYPE 420), DISC (Z3 CNDU 25 ALLOY 20 UB6), LINING (EPDM OR Equivalent) Test: MSS SP 61 Where applicable MARKING: Identification Plate ACC. To MSS SP 25. Service: Polluted Water, Temp (65C), PRESS. 10 BAR). Note: 2 Sets of sealing ring & inner linning for each valve.
We are currently looking for reliable suppliers offering high-quality products suitable for international trade. Please send your company profile, product catalog, and pricing information. We are open to reviewing a variety of categories for potential cooperation.
