We are actively seeking reliable suppliers for high-quality products to enhance our product offering. We are currently responding to a tender and are sourcing the required valves as per their detailed technical RFQ. We kindly request your **best technical and commercial offer**, including: Unit pricing for each item (FOB / EXW). STRAINER (Y-TYPE) S.N 29 - 1 Each Size: 2" Class: 900 LBS (TD-91) Ends: Butt Weld ANSI B 16.25, Pipe Schedule 80, L=320mm Description: Cast C/Steel Y-Filter Flanged Cover Type Construction: BODY: ASTM A216 WCB, BOLTED RETAINER PLATE: ASTM A 105 NPT RETAINER BUSHING, BOLTING: SA193 B7 & 194 2H, GASKET: SPIRAL WOUND 316L, WIRE MESH BACK UP S.S SCREEN 8/10 SCREEN SECTION 1.5 mm. TEST: API 598 Where applicable. MARKING: Identification Plate ACC. To MSS SP 25. Service: Steam Temp. 420C, Press. 54 Bar
We are actively seeking reliable suppliers for high-quality products to enhance our product offering. We are currently responding to a tender and are sourcing the required valves as per their detailed technical RFQ. We kindly request your **best technical and commercial offer**, including: Unit pricing for each item (FOB / EXW). PLUG VALVE S.N 22 - 2 Each Size: 1 1/2" Class: 300 LBS (FC-33) S.W. ANSI B 16.11 Ends: Flanges R.F ANSI B 16.5 "stock finish" FLANGE ND: 3", L=214mm Description: cast c/steel valve with heating jacket, bolted bonnet, wrench operated, non lubricated over size flange. Construction: BODY (ASTM A 216 WCB), PLUG (CAST DUCTILE IRON), SLEEVE (PTFE). TEST: API 598 & 599 Where applicable. MARKING: Identification Plate ACC. To MSS SP 25. Service: Liquid Sulphur, (TEMP. 145 C, PRESS. 15 BAR) Note1: copper or its alloys prohibited Note2: 2 sets of sealing joints & 1 set of seat for each valve. S.N 23 - 2 Each Size: 1/2" Class: 150 LBS (FC-16+18) Ends: Flanges R.F ANSI B 16.5 "stock finish", L=108mm Description: Cast St/Steel Valve, Wrench Operated, Non lubricated, Bolted Bonnet. Construction: BODY (A 296 CN 7M), PLUG (ALLOY 20 OF UB6), SLEEVE (PTFE). TEST: API 598 & 599. Service: Concentrated Acid & Amonia phosphoric slurry (TEMP. 90 C, PRESS. 10 BAR). Note1: copper or its alloys prohibited Note2: 2 sets of sealing joints & 1 set of seat for each valve. S.N 24 - 6 Each Size: 1 1/2" Class: 150 LBS Ends: Flanges R.F ANSI B 16.5 "stock finish" Description: Cast St/Steel Valve, Wrench Operated, Non lubricated, Bolted Bonnet. Construction: BODY (A 296 CN 7M), PLUG (ALLOY 20 OF UB6), SLEEVE (PTFE). TEST: API 598 & 599. Service: Concentrated Acid & Amonia phosphoric slurry (TEMP. 90 C, PRESS. 10 BAR). Note1: copper or its alloys prohibited Note2: 2 sets of sealing joints & 1 set of seat for each valve. S.N 25 - 6 Each Size: 6" Class: 150 LBS (FC-13) Ends: Flanges R.F ANSI B 16.5 "stock finish", L=267mm Description: Cast St/Steel Valve, Wrench Operated, Non lubricated, Bolted Bonnet. Construction: BODY (A 296 CN 7M), PLUG (ALLOY 20 OF UB6), SLEEVE (PTFE). TEST: API 598 & 599. Service: Concentrated Acid & Amonia phosphoric slurry (TEMP. 90 C, PRESS. 10 BAR). Note1: copper or its alloys prohibited Note2: 2 sets of sealing joints & 1 set of seat for each valve. S.N 26 - 4 Each Size: 6" Class: 150 LBS (FC-16+18) Ends: Flanges R.F ANSI B 16.5 "stock finish", L=267mm Description: Cast St/Steel Valve, Gear Operated, Non lubricated, Bolted Bonnet. Construction: BODY (ASTM A 351 CF 8M), PLUG (AISI 316), SLEEVE & SEAT (PTFE), COVER (AISI 316). TEST: API 598 & 599. Service: Cold Concentrated Sulphuric Acid (TEMP.45 C PRESS.: 9 Bar) Note: copper or its alloys prohibited S.N 27 - 1 Each Size: 2" Class: 150 LBS (FC-13) Ends: Flanges R.F ANSI B 16.5 "stock finish", L=178mm Description: Cast St/Steel Valve, Wrench Operated, Non lubricated, Bolted Bonnet. Construction: BODY (ASTM A 351 CF 8M), PLUG (AISI 316), SLEEVE & SEAT (PTFE), COVER (AISI 316). TEST: API 598 & 599. Service: Cold Concentrated Sulphuric Acid (TEMP.45 C PRESS.: 9 Bar) Note: copper or its alloys prohibited S.N 28 - 1 Each Size: 3" Class: 150 LBS (FC-17) Ends: Flange R.F ANSI B 16.5, L=203mm Description: Cast Iron Plug Valve PTFE Lined, Wrench Operated, Non Lubricated, Bolted Bonnet. Construction: BODY (CAST IRON) - LINNED PTFE, PLUG (CAST IRON) - LINNED PTFE. Service: Diluted Sulphuric Acid & Laboratories Effluent Water Note: 2 sets of sealing joints & 1 set of seat for each valve. S.N 31 - 2 Each
We are currently working on the *********** project in Karak, and I am looking for suppliers and manufacturers of rainwater drainage channels trenches.
We are actively seeking reliable suppliers for high-quality products to enhance our product offering. We are currently responding to a tender and are sourcing the required valves as per their detailed technical RFQ. We kindly request your **best technical and commercial offer**, including: Unit pricing for each item (FOB / EXW). GLOBE VALVE S.N 18 - 1 Each Size: 2" Class: 300LBS (EC-14) Ends: Flanges ANSI B 16.5 "stock finish" Description: cast c/steel valve, bolted bonnet, outside screw rising stem & yoke Operation Method: Hand wheel operated. Construction: ANSI B 16.10, BODY & BONNET (ASTM A 216 WCB), TRIM (A 182 F6), SEAT (A 182 F6 + STELLITE GR.6), STEM (A 182 F6). Test: API 600 Where applicable MARKING: Identification Plate ACC. To MSS SP 25. Service: Water, Temp (175C), PRESS. 6 BAR). Note: 2 sets of sealing joints & 1 set of seat for each valve. S.N 19 - 3 Each Size: 2" Class: 150 LBS (BC-11) Ends: Flanges R.F ANSI B 16.5 "stock finish" Description: cast c/steel valve, bolted bonnet, outside screw rising stem & yoke Operation Method: Hand wheel operated. Construction: ANSI B 16.10, BODY & BONNET (ASTM A 216 WCB), TRIM (A 182 F6), SEAT (A 182 F6), STEM (A 182 F6). Test: API 600 MARKING: Identification Plate ACC. To MSS SP 25. Service: Water, (Temp. 50C, PRESS. 16 BAR.) S.N 20 - 1 Each Size: 1" Class: 1500 LBS(BB-W1) S.W. ANSI B 16.11 Ends: Flanges ANSI B 16.5 "stock finish" Description: forged c/steel valve, welded bonnet, outside screw rising stem & yoke, bolted stuffing box, renewable seat. Operation Method: Hand wheel operated. Construction: ANSI B 16.10, BODY & BONNET (ASTM A 105), TRIM (A 182 F6), SEAT (A 182 F6 + STELLITE ON BODY & SEAT). TEST: API 598 & API 602 Where applicable. MARKING: Identification Plate ACC. To MSS SP 25. Service: Water, Temp (175C), PRESS. 6 BAR). Note1: copper or its alloys prohibited Note2: 2 sets of sealing joints & 1 set of seat for each valve. S.N 21 - 2 Each Size: 2" Class: 900 LBS (BD-91) Ends: Butt Welding ANSI B 16.25 to suit connection pipes - SCH.80 Description: cast c/steel valve, bolted bonnet, outside screw rising stem & yoke, bolted stuffing box, renewable seat. Operation Method: Hand Wheel operated. Cons: ANSI B 16.10, BODY & BONNET (ASTM A 216 WCB), TRIM (A 182 F6), SEAT & DISC (A 182 F6 + STELLITE GR 6), STEM (A 182 F6) Test: API 598 & API 600 Where Applicable. MARKING: Identification Plate ACC. To MSS SP 25. Service: H.P. STEAM, (TEMP. 420 C), (PRESS. 54 BAR). WATER, (Temp. 304 C, PRESS. 90 BAR).
We are actively seeking reliable suppliers for high-quality products to enhance our product offering. We are currently responding to a tender and are sourcing the required valves as per their detailed technical RFQ. We kindly request your **best technical and commercial offer**, including: Unit pricing for each item (FOB / EXW). CHECK VALVE S.N 14 - 1 Each Size: 2" Class: 300LBS (CC-33) Ends: Flanged R.F. ANSI B 16.5 " MSOTH FINISH R.T 10 Description: CAST KILLED C/STEEL Valve, Bolted cover, renewable seat. Construction: ANSI B 16.10, Body & Cover (ASTM A 352 LCB) Disc, Seat Hinge PIN (A 182 F6). Test: API 600 Where Applicable MARKING: Identification Plate ACC. To MSS SP 25. Service: Liquid Ammonia, (TEMP. 50 C), (PRESS. 21 BAR). Note: copper or its Alloys Prohibited. Note2: 2 Sets of gasket & seat for each valve. S.N 30 - 1 Each Size: 10" Class: 900LBS (CD-91) Ends: Butt Welding ANSI B 16.25 Description: cast c/steel valve, bolted cover, renewable seat. Construction: ANSI B 16.10, BODY & COVER (ASTM A 216 WCB). DISC & SEAT (A 182 F6 + STELLITE), HINGE PIN (A 182 F6). GASKET RING JOINT. Test: API 600 Where Applicable. MARKING: Identification Plate ACC. To MSS SP 25. Service: H.P. STEAM, (TEMP. 420 C), (PRESS. 54 BAR). Note: 2 sets of sealing joints & 1 set of seat for each valve. S.N 33 - 2 Each Size: 4" Class: 150 LBS Ends: FLANGED ANSI Description: Ball Check Valve (7434601), Type: 071 (Ball - PTFE), GGG 40.3 / PVDF TEST: API 598-599.
We are actively seeking reliable suppliers for high-quality products to enhance our product offering. We are currently responding to a tender and are sourcing the required valves as per their detailed technical RFQ. We kindly request your **best technical and commercial offer**, including: Unit pricing for each item (FOB / EXW). DIAPHRAGM VALVE S.N 3 - 2 Each Size: 3" Calss: 150 LBS BODY: Hard Rubber lined Cast Iron F.T. 22. Operation Method: Hand Wheel: STANDARD. Bonnet: Sealed Type, Cast Iron. Diaphragm: HYPALON. Flange: Template and bore holes off center-LINES, to norms ANSI B 16.5 series full Face Hard rubber Lined. Face to Face length to DIN standard 3202 F1. With opening closing indicator. N.B.: copper or its Alloys Prohibited. Third Party Laboratory test Certificate must. Confirm: Diaphragm material for H2SO4 diluted costic sosa diluted, Amin. COSTIC SODA DILUTED, NALCO, AMIN. S.N 4 - 82 Each Size: 2" Calss: 150 LBS Straight way type. Operation Method: Hand Wheel dive & opening closing indicate. Body &Bonnet: Cast Iron GG 25 ACC. TO DIN 1691 Flange: ANSI B 16.5 150 #FF Body & Flange full Face: Lined W/ Bonnet Diaphragm: Soft BUTYL rubber Face to Face length W/out Lining as per DIN standard 3202 F1. Operating Temperature: 40-90 c Note: copper or its Alloys Prohibited. Third Party Laboratory test Certificate is required S.N 34 - 11 Each Size: 2" Class: 150 LBS Description: Ductile Iron A (Drilled to ASA 150 Lbs), Body: Cast Iron PP-Lined, Hand Wheel Operated, Face to Face Length to DIN 3202 FI, Diaphragm: 237 Hypalon S.N 35 - 4 Each Size: 6" Class: 150 LBS Description: Ductile Iron A (Drilled to ASA 150 Lbs), Body: Cast Iron PP-Lined, Hand Wheel Operated, Face to Face Length to DIN 3202 FI, Diaphragm: 237 Hypalon
We have a good inquiry of flow meter We are looking forward to start collaboration with your esteemed company
We have a good inquiry of valve We are looking forward to start collaboration with your esteemed company
You are kindly requested to quote your best price to supply of the following item:- The requested material is : ASTM 128 Grade B3. The weight of Swing Jaw Plate is : 1180 Kg. Please clarify the following terms in your quotation: Total amount EXW. Total amount CFR Aqaba Seaport, Jordan. Delivery time. Payment terms. Country of origin and Country of shipment.
Dear Sirs, Kindly provide us with your quotation to cover the supply of the materials specified as per the following and attachment:- Supply of valves • Validity of your offer: • Delivery Period(production date + shipping date) • Terms of payment: • Shipping details • Shipment: Ex-work, Fob and CFR Aqaba Seaport . • Country of Origin ; Country of Shipment
