We kindly request your offer as per the attached specifications. While preparing your offer kindly consider our preferred conditions: Offer Validity: 60 days from the date of closing. Datasheet & MTC: These are very important and must be included. Delivery Period: Specify production and shipping time (Shortest delivery time).
We kindly request your offer as per the attached specifications. While preparing your offer kindly consider our preferred conditions: Offer Validity: 60 days from the date of closing. Datasheet & MTC: These are very important and must be included. Delivery Period: Specify production and shipping time (Shortest delivery time). Pricing: Quote CFR-Aqaba/Jordan sea freight. It’s very important. Delivery Details: State the shortest but fixed delivery time and provide approximate weight and origin of goods and country of shipment. Payment Terms: Please specify.
We kindly request your offer as per the attached specifications. While preparing your offer kindly consider our preferred conditions: Offer Validity: 60 days from the date of closing. Datasheet & MTC: These are very important and must be included. Delivery Period: Specify production and shipping time (Shortest delivery time).
We are actively seeking reliable suppliers for high-quality products to enhance our product offering. We are currently responding to a tender and are sourcing the required valves as per their detailed technical RFQ. We kindly request your **best technical and commercial offer**, including: Unit pricing for each item (FOB / EXW). STRAINER (Y-TYPE) S.N 29 - 1 Each Size: 2" Class: 900 LBS (TD-91) Ends: Butt Weld ANSI B 16.25, Pipe Schedule 80, L=320mm Description: Cast C/Steel Y-Filter Flanged Cover Type Construction: BODY: ASTM A216 WCB, BOLTED RETAINER PLATE: ASTM A 105 NPT RETAINER BUSHING, BOLTING: SA193 B7 & 194 2H, GASKET: SPIRAL WOUND 316L, WIRE MESH BACK UP S.S SCREEN 8/10 SCREEN SECTION 1.5 mm. TEST: API 598 Where applicable. MARKING: Identification Plate ACC. To MSS SP 25. Service: Steam Temp. 420C, Press. 54 Bar
We are actively seeking reliable suppliers for high-quality products to enhance our product offering. We are currently responding to a tender and are sourcing the required valves as per their detailed technical RFQ. We kindly request your **best technical and commercial offer**, including: Unit pricing for each item (FOB / EXW). PLUG VALVE S.N 22 - 2 Each Size: 1 1/2" Class: 300 LBS (FC-33) S.W. ANSI B 16.11 Ends: Flanges R.F ANSI B 16.5 "stock finish" FLANGE ND: 3", L=214mm Description: cast c/steel valve with heating jacket, bolted bonnet, wrench operated, non lubricated over size flange. Construction: BODY (ASTM A 216 WCB), PLUG (CAST DUCTILE IRON), SLEEVE (PTFE). TEST: API 598 & 599 Where applicable. MARKING: Identification Plate ACC. To MSS SP 25. Service: Liquid Sulphur, (TEMP. 145 C, PRESS. 15 BAR) Note1: copper or its alloys prohibited Note2: 2 sets of sealing joints & 1 set of seat for each valve. S.N 23 - 2 Each Size: 1/2" Class: 150 LBS (FC-16+18) Ends: Flanges R.F ANSI B 16.5 "stock finish", L=108mm Description: Cast St/Steel Valve, Wrench Operated, Non lubricated, Bolted Bonnet. Construction: BODY (A 296 CN 7M), PLUG (ALLOY 20 OF UB6), SLEEVE (PTFE). TEST: API 598 & 599. Service: Concentrated Acid & Amonia phosphoric slurry (TEMP. 90 C, PRESS. 10 BAR). Note1: copper or its alloys prohibited Note2: 2 sets of sealing joints & 1 set of seat for each valve. S.N 24 - 6 Each Size: 1 1/2" Class: 150 LBS Ends: Flanges R.F ANSI B 16.5 "stock finish" Description: Cast St/Steel Valve, Wrench Operated, Non lubricated, Bolted Bonnet. Construction: BODY (A 296 CN 7M), PLUG (ALLOY 20 OF UB6), SLEEVE (PTFE). TEST: API 598 & 599. Service: Concentrated Acid & Amonia phosphoric slurry (TEMP. 90 C, PRESS. 10 BAR). Note1: copper or its alloys prohibited Note2: 2 sets of sealing joints & 1 set of seat for each valve. S.N 25 - 6 Each Size: 6" Class: 150 LBS (FC-13) Ends: Flanges R.F ANSI B 16.5 "stock finish", L=267mm Description: Cast St/Steel Valve, Wrench Operated, Non lubricated, Bolted Bonnet. Construction: BODY (A 296 CN 7M), PLUG (ALLOY 20 OF UB6), SLEEVE (PTFE). TEST: API 598 & 599. Service: Concentrated Acid & Amonia phosphoric slurry (TEMP. 90 C, PRESS. 10 BAR). Note1: copper or its alloys prohibited Note2: 2 sets of sealing joints & 1 set of seat for each valve. S.N 26 - 4 Each Size: 6" Class: 150 LBS (FC-16+18) Ends: Flanges R.F ANSI B 16.5 "stock finish", L=267mm Description: Cast St/Steel Valve, Gear Operated, Non lubricated, Bolted Bonnet. Construction: BODY (ASTM A 351 CF 8M), PLUG (AISI 316), SLEEVE & SEAT (PTFE), COVER (AISI 316). TEST: API 598 & 599. Service: Cold Concentrated Sulphuric Acid (TEMP.45 C PRESS.: 9 Bar) Note: copper or its alloys prohibited S.N 27 - 1 Each Size: 2" Class: 150 LBS (FC-13) Ends: Flanges R.F ANSI B 16.5 "stock finish", L=178mm Description: Cast St/Steel Valve, Wrench Operated, Non lubricated, Bolted Bonnet. Construction: BODY (ASTM A 351 CF 8M), PLUG (AISI 316), SLEEVE & SEAT (PTFE), COVER (AISI 316). TEST: API 598 & 599. Service: Cold Concentrated Sulphuric Acid (TEMP.45 C PRESS.: 9 Bar) Note: copper or its alloys prohibited S.N 28 - 1 Each Size: 3" Class: 150 LBS (FC-17) Ends: Flange R.F ANSI B 16.5, L=203mm Description: Cast Iron Plug Valve PTFE Lined, Wrench Operated, Non Lubricated, Bolted Bonnet. Construction: BODY (CAST IRON) - LINNED PTFE, PLUG (CAST IRON) - LINNED PTFE. Service: Diluted Sulphuric Acid & Laboratories Effluent Water Note: 2 sets of sealing joints & 1 set of seat for each valve. S.N 31 - 2 Each
We are actively seeking reliable suppliers for high-quality products to enhance our product offering. We are currently responding to a tender and are sourcing the required valves as per their detailed technical RFQ. We kindly request your **best technical and commercial offer**, including: Unit pricing for each item (FOB / EXW). GLOBE VALVE S.N 18 - 1 Each Size: 2" Class: 300LBS (EC-14) Ends: Flanges ANSI B 16.5 "stock finish" Description: cast c/steel valve, bolted bonnet, outside screw rising stem & yoke Operation Method: Hand wheel operated. Construction: ANSI B 16.10, BODY & BONNET (ASTM A 216 WCB), TRIM (A 182 F6), SEAT (A 182 F6 + STELLITE GR.6), STEM (A 182 F6). Test: API 600 Where applicable MARKING: Identification Plate ACC. To MSS SP 25. Service: Water, Temp (175C), PRESS. 6 BAR). Note: 2 sets of sealing joints & 1 set of seat for each valve. S.N 19 - 3 Each Size: 2" Class: 150 LBS (BC-11) Ends: Flanges R.F ANSI B 16.5 "stock finish" Description: cast c/steel valve, bolted bonnet, outside screw rising stem & yoke Operation Method: Hand wheel operated. Construction: ANSI B 16.10, BODY & BONNET (ASTM A 216 WCB), TRIM (A 182 F6), SEAT (A 182 F6), STEM (A 182 F6). Test: API 600 MARKING: Identification Plate ACC. To MSS SP 25. Service: Water, (Temp. 50C, PRESS. 16 BAR.) S.N 20 - 1 Each Size: 1" Class: 1500 LBS(BB-W1) S.W. ANSI B 16.11 Ends: Flanges ANSI B 16.5 "stock finish" Description: forged c/steel valve, welded bonnet, outside screw rising stem & yoke, bolted stuffing box, renewable seat. Operation Method: Hand wheel operated. Construction: ANSI B 16.10, BODY & BONNET (ASTM A 105), TRIM (A 182 F6), SEAT (A 182 F6 + STELLITE ON BODY & SEAT). TEST: API 598 & API 602 Where applicable. MARKING: Identification Plate ACC. To MSS SP 25. Service: Water, Temp (175C), PRESS. 6 BAR). Note1: copper or its alloys prohibited Note2: 2 sets of sealing joints & 1 set of seat for each valve. S.N 21 - 2 Each Size: 2" Class: 900 LBS (BD-91) Ends: Butt Welding ANSI B 16.25 to suit connection pipes - SCH.80 Description: cast c/steel valve, bolted bonnet, outside screw rising stem & yoke, bolted stuffing box, renewable seat. Operation Method: Hand Wheel operated. Cons: ANSI B 16.10, BODY & BONNET (ASTM A 216 WCB), TRIM (A 182 F6), SEAT & DISC (A 182 F6 + STELLITE GR 6), STEM (A 182 F6) Test: API 598 & API 600 Where Applicable. MARKING: Identification Plate ACC. To MSS SP 25. Service: H.P. STEAM, (TEMP. 420 C), (PRESS. 54 BAR). WATER, (Temp. 304 C, PRESS. 90 BAR).
We are actively seeking reliable suppliers for high-quality products to enhance our product offering. We are currently responding to a tender and are sourcing the required valves as per their detailed technical RFQ. We kindly request your **best technical and commercial offer**, including: Unit pricing for each item (FOB / EXW). GATE VALVE S.N 2 - 3 Each Size: 2" Class: 900 Lbs (AD-91) Ends: Butt Welding ANSI B 16.25 to suit connection pipes - SCH.80 Description: CAST C/STEEL Bonnet Type: Bolted Bonnet Stem Type: Outside screw rising STEM & YOKE, flexible wedge or parallal slide. Packing Type: Bolted stuffing box. Seat Type: Renewable seat. Operation Method: Hand Wheel operated. Cons: ANSI B16.10, Body & Bonnet (ASTM A216 WCB), DISC (A182 F6 + Stellite GR.6). Seat (A182 F6 + STELLITE GR.6), STEM (A 182 F6). Test: API 598 & API 600 Where Applicable. MARKING: Identification Plate ACC. To MSS SP 25. Service: H.P. STEAM, (TEMP. 420 C), (PRESS. 54 BAR). Note: copper or its Alloys Prohibited. S.N 5 - 20 Each Size: 2" Class: 150 Lbs (AC-11) Ends: Flanged ANSI B 16.5 " Stock finish" Description: CAST C/STEEL Valve Bonnet Type: Bolted Bonnet Stem Type: Outside screw rising STEM & YOKE, Solid wedge. Packing Type: Bolted stuffing box. Seat Type: Renewable seat. Operation Method: Hand Wheel operated. Cons: ANSI B16.10, Body & Bonnet (ASTM A216 WCB), Trim (A182 F6 + Stellite GR.6). Seat (A182 F6 + STELLITE GR.6), Seat (A 182 F6). Test: API 598 & API 600 Where Applicable. MARKING: Identification Plate ACC. To MSS SP 25.
Boiler with initial specifications: - All European pieces - High thickness - 10-12 bar - 10 tons steam - Quantity: 2
I'm looking for a polyurethane material to cast medium-sized artwork into our silicone molds. Can you help me choose the right material for my project and provide pricing?
We kindly request your offer as per the attached specifications. While preparing your offer kindly consider our preferred conditions: Offer Validity: 60 days from the date of closing. Datasheet: These are very important and must be included. Delivery Period: Specify production and shipping time (Shortest delivery time).
