eramic fiber bulk, ceramic fiber cotton 1. TEMPERATURE CLASSIFICATION COM alumina silicate swinging fiber cotton 1100 °C ST alumina silicate swinging fiber cotton 1260 °C HP alumina silicate swinging fiber cotton 1260 °C HA alumina silicate swinging fiber cotton 1360 °C HAZ alumina silicate swinging fiber cotton 1360 °C HZ alumina silicate swinging fiber cotton 1430 °C 2. FEATURE No lube, no processed, low ball sediment blown fiber
ame: aluminum silicate fiber block/module ceramic fiber block/module Characteristic: Low thermal conductivity To be secured by concealed anchor Greater mechanical strength Resistance to gas flow erosion Shorter heat up and cool down time Resilience and resistance to thermal shock Flexible and easy to cut or install Application: - Iron and Steel: Reheating furnace, Multi and single stack coil annealing furnaces, Transfer ladle lids, Continuous annealing and coatin
All kinds of alumina silicate fiber boards, adopting corresponding blowing fiber (COM, ST, HA, HP, HAZ, HZ) as the material, are produced by vacuum formed technology. All kinds of alumina silicate fiber boards don not only possess the same function of fiber, but also have hard texture, excellent toughness and intensity, and excellent fire resistant and heat preservation.
The swinging fiber blankets have long fibers with even diameters and low sediment balls with improved functions in fiber interweaving, resisting layers divided resisting wind erosion, pliability and tensile strength, thus have improved the applied function and reduced the loss of materials. The swinging blandest does not use any binding preparation to make sure that the products possess perfect liability and stability under all kinds of environment.
KRS fiber cement board are man-made from a matrix of cement and cellulose re-inforced with fibres and fillers. The ratio of each ingredient can be varied to ensure that the finished product is able to meet the performance requirements demanded by each application. A wood grain is imprinted onto the surface during the manufacturing process
KRS fiber cement wall cladding are man-made from a matrix of cement and cellulose re-inforced with fibres and fillers. The ratio of each ingredient can be varied to ensure that the finished product is able to meet the performance requirements demanded by each application. A wood grain is imprinted onto the surface during the manufacturing process
KRS fiber cement decorative siding are man-made from a matrix of cement and cellulose re-inforced with fibres and fillers. The ratio of each ingredient can be varied to ensure that the finished product is able to meet the performance requirements demanded by each application. A wood grain is imprinted onto the surface during the manufacturing process.
Karbon fiber veya karbon elyaf, Arapça dilinden gelme olan, teknoloji ürünü olan ipliksi türü bir maddedir. Ana bileşimleri Karbonlaşmış akrilik elyaftır (Orlon), katran ve naylondur. Karbon fiberin yapısı, çelikten 4,5 kat daha hafif olmasına rağmen 3 kat daha dayanıklıdır. Karbon fiber, naylon gibi esnek ve orlon gibi de orta derecede dayanıklı değildir. Daha sert ve çok daha dayanıklıdır.
fire proofing,heat insulation, good durability, high strength,low thermal conductivity,sound proofing
There will be elegant decorative designs made by plasterboards, ...
