Endüstriyel Temizlik Vakumları için detaylı inceleme yapabilmemiz için bize bir fiyat teklifi gönderebilir misiniz?
EN 10025 Standardina Göre Karbon Çelik Saclar S235JR Boyutlar: Uzunluk: 8.000 mm Genislik: 2.000 mm Kalinlik: 14 mm 3,5 ton
Cuplock Iskele için net ve degerlendirilmesi kolay bir maliyet teklifi paylasabilir misiniz?
Asagidaki özelliklere sahip çelik saclarin tedariki ve pah kirilmasi için lütfen bir teklif talep ediyoruz:Pahli Çelik Saclar (S235JR / EN)Malzeme: Karbon Çelik SacSinif: S235JRStandart: ENTKalinlik: 14 mmPlaka Boyutlari: 2000 mm 8000 mm 14 mmToplam Miktar: 4.500 levhaToplam Agirlik: 7.912 tonPah Kirma Gereksinimleri:Pah Açisi: 37 derecePahli Kenarlar:Her iki uzun kenar (her biri 8.000 mm)Bir kisa kenar (2.000 mm)
Bu çizime göre bu ürüne ihtiyaci olan bir müsterim var. Belirtilen tüm özellikler önemlidir.
We are currently sourcing flat steel sheet piles for an upcoming project and kindly request a quotation for the following specifications: • Type: Flat Sheet Piles • Thickness: 14 mm • Length: 8 meters • Width: Please provide the maximum available width • Yield Strength: 37 kg/mm² (equivalent to 370 MPa) • Quantity: Approximately 9,000 tons • Lead Time: Please confirm availability and estimated production/delivery time Maha Ahmed El-Shayeb
Are there galvanized steel nails with a diameter of 52mm and a hardness of 8.8?
Please be advised that our client modified the Length of the pipes according to the following table:- Description Wall Thick Mm 22 and 22 Length M 11.75 and 9.30 Diameter mm 950 for both Unit Quantity 370 and 185 Conditions - Steel Grade ST 52 - Spiral Welded - Beveled Surface from both sides - Detailed Technical specification should be attached and send with the offer - Payment L/C - Delivery terms CIF - West Port Said Port, Port Said, Egypt - Mechanical and chemical Test Certificates and welding test are required and must be approved by an international inspection organization (Third Party Inspection Certificate) - Closing date 19/5/2025 - The minimum delivery time will be preferable - Origin
Kindly be informed that one of our client invited us for the supply of Welded Steel pipes according to the following Technical data and conditions:- Wall Thick Mm 22 Length M 11 Diameter mm 950 Unit Quantity PCS 555 Welding Steel PIPE 22 11 950 PCS 555 Conditions - Steel Grade ST 52 - Spiral Welded - Beveled Surface from both sides - Detailed Technical specification should be attached and send with the offer - Payment L/C - Delivery terms CIF
