do you have LFP 04 70 A solar batteries? If so, please let me know the price. 1/ 125 WC solar panels 2/ LFP04 70A batteries with integrated MPPT solar charge controller 3/ 50W 3500°K LED lights
I am the general manager of the Guinean electricity company I wish to place the bulk order with you to resell it in Guinea Conakry on behalf of the said company thank you in advance
I want pillars of light and wire 11 meter clip, Iraq specifications Its columns are round 11 specifications of Iraq Columns clamp 9 meters 120 mm wire 210 mm wire
Asking about poles - lighting-MCB-Elcb-sub distribution board-main distribution panel
1. Electrical devices - Powerbanks; - Charging stations; - Fuel generators; - Accumulators; - Uninterruptible power supply device;
our needs. 1-The pumps more than 50taines 2-The pipes (UPP pipes, breathing pipes, dip pipes, etc.) 3-The lighting equipment of the station (contactor, switch, circuit breaker, light bulb for canopi, solar plates....) 4-Washing device (vacuum, blower, etc.) 5-keys for the lubrication bay (complete tool box) 6-suppressors, inverters, voltage regulators..... 7- 20ton trucks with yap of at least 10tons to bury the tanks 8- generators....
Please send quotation for the attached file
1.- LUMINAIRE UNIT WITH LED TECHNOLOGY 150-170W ( quantity:10,000) LUMINARY • BRAND: INDICATE • MODEL OF THE LED TECHNOLOGY LUMINAIRE: INDICATE • ORIGIN: INDICATE • NOMINAL POWER OF THE LED LUMINAIRE: IT MUST BE IN THE RANGE OF 150 - 170W • POWER FACTOR OF THE ASSEMBLY OF THE LED LUMINAIRE: ≥ 0.95 • WEIGHT OF THE LED LUMINAIRE: ≤ 12 KG (may vary) • THE OPTICAL AND ELECTRICAL BLOCK: THEY SHOULD BE IN SEPARATE COMPARTMENTS, SHARING THE SAME CASE. • THE FIXING SYSTEM OF THE LED LUMINAIRE MUST HAVE ELEMENTS WITH HIGH OXIDATION RESISTANCE, SUITABLE FOR OUTDOOR INSTALLATION. • FIXING ON METAL TUBES WITH AN EXTERNAL DIAMETER OF: LESS THAN OR EQUAL TO 48.33 MM UP TO GREATER THAN OR EQUAL TO 60.3 MM. AND WHERE APPROPRIATE, WASHERS, GALVANIZED OR ZINC PLATED. • TILT ANGLE THAT IS ADJUSTABLE ON SITE FOR BOTH POST-TOP (0 TO +15°) AND SIDE ENTRY (0 TO -15°) ASSEMBLY IN 5° STEPS. • IMPACT RESISTANCE INDEX: ≥ IK 08; IN ACCORDANCE WITH THE UNE-EN 62262 STANDARD OR ITS EQUIVALENTS • TIGHTNESS OF THE OPTICAL BLOCK: ≥ IP 66; IN ACCORDANCE WITH THE IEC 60598 STANDARD OR ITS EQUIVALENT ACCORDING TO THE ORIGIN OF THE LUMINAIRE. • THE MODEL OF THE LUMINAIRE SHOULD HAVE SEALING ON THE BODY IN LOW OR HIGH RELIEF MADE IN THE FACTORY, STICKERS OR OVERLAPPED PLATES WILL NOT BE ACCEPTED.
I want to buy the solar panels for public lighting with lamp and batteries
we need factory for Batteries
