We are actively seeking reliable suppliers for high-quality products to enhance our product offering. We are currently responding to a tender and are sourcing the required valves as per their detailed technical RFQ. We kindly request your **best technical and commercial offer**, including: Unit pricing for each item (FOB / EXW). PLUG VALVE S.N 22 - 2 Each Size: 1 1/2" Class: 300 LBS (FC-33) S.W. ANSI B 16.11 Ends: Flanges R.F ANSI B 16.5 "stock finish" FLANGE ND: 3", L=214mm Description: cast c/steel valve with heating jacket, bolted bonnet, wrench operated, non lubricated over size flange. Construction: BODY (ASTM A 216 WCB), PLUG (CAST DUCTILE IRON), SLEEVE (PTFE). TEST: API 598 & 599 Where applicable. MARKING: Identification Plate ACC. To MSS SP 25. Service: Liquid Sulphur, (TEMP. 145 C, PRESS. 15 BAR) Note1: copper or its alloys prohibited Note2: 2 sets of sealing joints & 1 set of seat for each valve. S.N 23 - 2 Each Size: 1/2" Class: 150 LBS (FC-16+18) Ends: Flanges R.F ANSI B 16.5 "stock finish", L=108mm Description: Cast St/Steel Valve, Wrench Operated, Non lubricated, Bolted Bonnet. Construction: BODY (A 296 CN 7M), PLUG (ALLOY 20 OF UB6), SLEEVE (PTFE). TEST: API 598 & 599. Service: Concentrated Acid & Amonia phosphoric slurry (TEMP. 90 C, PRESS. 10 BAR). Note1: copper or its alloys prohibited Note2: 2 sets of sealing joints & 1 set of seat for each valve. S.N 24 - 6 Each Size: 1 1/2" Class: 150 LBS Ends: Flanges R.F ANSI B 16.5 "stock finish" Description: Cast St/Steel Valve, Wrench Operated, Non lubricated, Bolted Bonnet. Construction: BODY (A 296 CN 7M), PLUG (ALLOY 20 OF UB6), SLEEVE (PTFE). TEST: API 598 & 599. Service: Concentrated Acid & Amonia phosphoric slurry (TEMP. 90 C, PRESS. 10 BAR). Note1: copper or its alloys prohibited Note2: 2 sets of sealing joints & 1 set of seat for each valve. S.N 25 - 6 Each Size: 6" Class: 150 LBS (FC-13) Ends: Flanges R.F ANSI B 16.5 "stock finish", L=267mm Description: Cast St/Steel Valve, Wrench Operated, Non lubricated, Bolted Bonnet. Construction: BODY (A 296 CN 7M), PLUG (ALLOY 20 OF UB6), SLEEVE (PTFE). TEST: API 598 & 599. Service: Concentrated Acid & Amonia phosphoric slurry (TEMP. 90 C, PRESS. 10 BAR). Note1: copper or its alloys prohibited Note2: 2 sets of sealing joints & 1 set of seat for each valve. S.N 26 - 4 Each Size: 6" Class: 150 LBS (FC-16+18) Ends: Flanges R.F ANSI B 16.5 "stock finish", L=267mm Description: Cast St/Steel Valve, Gear Operated, Non lubricated, Bolted Bonnet. Construction: BODY (ASTM A 351 CF 8M), PLUG (AISI 316), SLEEVE & SEAT (PTFE), COVER (AISI 316). TEST: API 598 & 599. Service: Cold Concentrated Sulphuric Acid (TEMP.45 C PRESS.: 9 Bar) Note: copper or its alloys prohibited S.N 27 - 1 Each Size: 2" Class: 150 LBS (FC-13) Ends: Flanges R.F ANSI B 16.5 "stock finish", L=178mm Description: Cast St/Steel Valve, Wrench Operated, Non lubricated, Bolted Bonnet. Construction: BODY (ASTM A 351 CF 8M), PLUG (AISI 316), SLEEVE & SEAT (PTFE), COVER (AISI 316). TEST: API 598 & 599. Service: Cold Concentrated Sulphuric Acid (TEMP.45 C PRESS.: 9 Bar) Note: copper or its alloys prohibited S.N 28 - 1 Each Size: 3" Class: 150 LBS (FC-17) Ends: Flange R.F ANSI B 16.5, L=203mm Description: Cast Iron Plug Valve PTFE Lined, Wrench Operated, Non Lubricated, Bolted Bonnet. Construction: BODY (CAST IRON) - LINNED PTFE, PLUG (CAST IRON) - LINNED PTFE. Service: Diluted Sulphuric Acid & Laboratories Effluent Water Note: 2 sets of sealing joints & 1 set of seat for each valve. S.N 31 - 2 Each
We are currently working on the *********** project in Karak, and I am looking for suppliers and manufacturers of rainwater drainage channels trenches.
Buscamos activamente proveedores confiables de productos de alta calidad para ampliar nuestra oferta. Actualmente estamos respondiendo a una licitación y estamos adquiriendo las válvulas necesarias según su solicitud de cotización técnica detallada. Le solicitamos su **mejor oferta técnica y comercial**, que incluya: Precio unitario de cada artículo (FOB/EXW). VÁLVULA DE GLOBO N.° de serie 18 - 1 unidad Tamaño: 2" Clase: 300 lbs (EC-14) Extremos: Bridas ANSI B 16.5 "acabado original" Descripción: Válvula de acero fundido, bonete atornillado, vástago ascendente y horquilla con tornillo exterior Método de operación: Accionamiento manual. Construcción: ANSI B 16.10, CUERPO Y BONETE (ASTM A 216 WCB), INTERIORES (A 182 F6), ASIENTO (A 182 F6 + STELLITE GR.6), VÁSTAGO (A 182 F6). Prueba: API 600 (si corresponde) MARCADO: Placa de identificación según MSS SP 25. Servicio: Agua, temperatura (175 °C), presión (6 bar). Nota: 2 juegos de juntas de sellado y 1 juego de asiento para cada válvula Válvula. N.° de serie 19 - 3 unidades Tamaño: 2" Clase: 150 lbs (BC-11) Extremos: Bridas R.F ANSI B 16.5 "acabado original" Descripción: Válvula de acero fundido, bonete atornillado, vástago ascendente y horquilla con tornillo exterior Método de operación: Accionamiento manual. Construcción: ANSI B 16.10, CUERPO Y BONETE (ASTM A 216 WCB), INTERIORES (A 182 F6), ASIENTO (A 182 F6), VÁSTAGO (A 182 F6). Prueba: API 600 MARCADO: Placa de identificación ACC. Según MSS SP 25. Servicio: Agua (Temp. 50 °C, PRESIÓN 16 BAR). N.° de serie: 20 - 1 unidad. Tamaño: 1" Clase: 1500 lb (BB-W1) SW. ANSI B 16.11 Extremos: Bridas ANSI B 16.5 con acabado estándar. Descripción: Válvula de acero forjado, bonete soldado, vástago y yugo ascendentes con tornillo exterior, prensaestopas atornillado, asiento renovable. Método de operación: Accionamiento manual. Construcción: ANSI B 16.10, CUERPO Y BONETE (ASTM A 105), INTERIORES (A 182 F6), ASIENTO (A 182 F6 + ESTELITAS EN CUERPO Y ASIENTO). PRUEBAS: API 598 y API 602, según corresponda. MARCADO: Placa de identificación según MSS SP 25. Servicio: Agua, Temperatura (175 °C), PRESIÓN (6 BAR). Nota 1: Se prohíbe el uso de cobre o sus aleaciones. Nota 2: 2 juegos de juntas de sellado y 1 juego de asiento por cada válvula. N.° de serie 21 - 2 unidades. Tamaño: 2" Clase: 900 lbs (BD-91) Extremos: Soldadura a tope ANSI B 16.25 para tuberías de conexión - SCH.80. Descripción: Válvula de acero fundido, bonete atornillado, vástago y horquilla ascendentes con tornillo exterior, prensaestopas atornillado, asiento renovable. Método de operación: Operación con volante. Contras: ANSI B 16.10, CUERPO Y BONETE (ASTM A 216 WCB), GUARNICIÓN (A 182 F6), ASIENTO Y DISCO (A 182 F6 + STELLITE GR 6), VÁSTAGO (A 182 F6) Prueba: API 598 y API 600 cuando corresponda. MARCADO: Placa de identificación según MSS SP 25. Servicio: VAPOR DE ALTA PRESIÓN (TEMP. 420 °C) (PRES. 54 BAR). AGUA (TEMP. 304 °C, PRESIÓN 90 BAR).
We are actively seeking reliable suppliers for high-quality products to enhance our product offering. We are currently responding to a tender and are sourcing the required valves as per their detailed technical RFQ. We kindly request your **best technical and commercial offer**, including: Unit pricing for each item (FOB / EXW). CHECK VALVE S.N 14 - 1 Each Size: 2" Class: 300LBS (CC-33) Ends: Flanged R.F. ANSI B 16.5 " MSOTH FINISH R.T 10 Description: CAST KILLED C/STEEL Valve, Bolted cover, renewable seat. Construction: ANSI B 16.10, Body & Cover (ASTM A 352 LCB) Disc, Seat Hinge PIN (A 182 F6). Test: API 600 Where Applicable MARKING: Identification Plate ACC. To MSS SP 25. Service: Liquid Ammonia, (TEMP. 50 C), (PRESS. 21 BAR). Note: copper or its Alloys Prohibited. Note2: 2 Sets of gasket & seat for each valve. S.N 30 - 1 Each Size: 10" Class: 900LBS (CD-91) Ends: Butt Welding ANSI B 16.25 Description: cast c/steel valve, bolted cover, renewable seat. Construction: ANSI B 16.10, BODY & COVER (ASTM A 216 WCB). DISC & SEAT (A 182 F6 + STELLITE), HINGE PIN (A 182 F6). GASKET RING JOINT. Test: API 600 Where Applicable. MARKING: Identification Plate ACC. To MSS SP 25. Service: H.P. STEAM, (TEMP. 420 C), (PRESS. 54 BAR). Note: 2 sets of sealing joints & 1 set of seat for each valve. S.N 33 - 2 Each Size: 4" Class: 150 LBS Ends: FLANGED ANSI Description: Ball Check Valve (7434601), Type: 071 (Ball - PTFE), GGG 40.3 / PVDF TEST: API 598-599.
We are actively seeking reliable suppliers for high-quality products to enhance our product offering. We are currently responding to a tender and are sourcing the required valves as per their detailed technical RFQ. We kindly request your **best technical and commercial offer**, including: Unit pricing for each item (FOB / EXW). BALL VALVE S.N 13 - 2 Each Size: 3/4" Class: 150 Lbs (DA-12) Ends: NPT, Female ANI B 2.1 Description: Forged St/Steel Valve, reduced bore, fire safe type, massive ball. Packing Type: Bolted stuffing box. Seat Type: Renewable seat. Operation Method: Wrench operated 1/4 inch turn. Cons: API 6 D, Body (ASTM A 182F 316L), Body stem 316, Seats (PTFE) Seat (A182 F6 + STELLITE GR.6), Seat (A 182 F6). Test: API 598 Service: Semi treated water, temp:110C, 10 Bar MARKING: Identification Plate ACC. To MSS SP 25. copper or its Alloys Prohibited. Third Party
We are actively seeking reliable suppliers for high-quality products to enhance our product offering. We are currently responding to a tender and are sourcing the required valves as per their detailed technical RFQ. We kindly request your **best technical and commercial offer**, including: Unit pricing for each item (FOB / EXW). GATE VALVE S.N 2 - 3 Each Size: 2" Class: 900 Lbs (AD-91) Ends: Butt Welding ANSI B 16.25 to suit connection pipes - SCH.80 Description: CAST C/STEEL Bonnet Type: Bolted Bonnet Stem Type: Outside screw rising STEM & YOKE, flexible wedge or parallal slide. Packing Type: Bolted stuffing box. Seat Type: Renewable seat. Operation Method: Hand Wheel operated. Cons: ANSI B16.10, Body & Bonnet (ASTM A216 WCB), DISC (A182 F6 + Stellite GR.6). Seat (A182 F6 + STELLITE GR.6), STEM (A 182 F6). Test: API 598 & API 600 Where Applicable. MARKING: Identification Plate ACC. To MSS SP 25. Service: H.P. STEAM, (TEMP. 420 C), (PRESS. 54 BAR). Note: copper or its Alloys Prohibited. S.N 5 - 20 Each Size: 2" Class: 150 Lbs (AC-11) Ends: Flanged ANSI B 16.5 " Stock finish" Description: CAST C/STEEL Valve Bonnet Type: Bolted Bonnet Stem Type: Outside screw rising STEM & YOKE, Solid wedge. Packing Type: Bolted stuffing box. Seat Type: Renewable seat. Operation Method: Hand Wheel operated. Cons: ANSI B16.10, Body & Bonnet (ASTM A216 WCB), Trim (A182 F6 + Stellite GR.6). Seat (A182 F6 + STELLITE GR.6), Seat (A 182 F6). Test: API 598 & API 600 Where Applicable. MARKING: Identification Plate ACC. To MSS SP 25.
Boiler with initial specifications: - All European pieces - High thickness - 10-12 bar - 10 tons steam - Quantity: 2
Tenemos una buena consulta sobre caudalímetros. Esperamos colaborar con su estimada empresa.
We have a good inquiry of DI pipe We are looking forward to start collaboration with your esteemed company
Busco un material de poliuretano para moldear piezas de tamaño mediano en nuestros moldes de silicona. ¿Podrían ayudarme a elegir el material adecuado para mi proyecto y darme precios?
